Image 1 / 3

    How To Make a Faux Suede Bracelet With Tube Beads

    This classy bracelet is easy to make yourself! You can use this design and make it in different colors with our wide range of Faux suede cord. 

    Start by cutting the cord. You will need 4 strands of the same length and you can measure with your wrist how much you need. You will also need 1 strand that's about 2,5cm shorter and you will need to cut it in half. Now you can string 1 tube bead on the 4 other strands. Note: by making a twisting motion, it will be easier to string the tube beads. It also helps to cut the cord diagonally.

    For the fifth strand you will have to do as follow: 
    Put 1 bigger crimp bead (4mm) on the suede cord and make a loop by putting the end back through the crimp bead. Do not fasten the bead yet! Cut a piece of Nylon thread and thread a smaller crimp bead (2mm). Put the nylon thread though the suede loop and back through the crimp bead. Pull it tight and fasten the crimp bead. Now you can pull the suede cord tight and also fasten the bigger crimp bead. Now you can thread the faceted and rhinestone beads through the nylon cord and repeat the step with the crimp beads on the other side. To cover the crimp beads, you can use our covers for the 2mm and a Cylinder spacer bead for the bigger crimp beads. 

    Glue all the ends in the end tips and let it dry. Attach a 4mm jumpring to all the endtips. Use a 6mm jumpring to put all the strands together. Note: make sure to use the same order on both sides, this way the bracelet won't twist while wearing. Attach the lobster clasp and extender and your bracelet is ready to wear!

    Used materials: 

    Spacer beads cylinder 6x5mm
    Imitation suede lace lilac 3mm
    Silver tube beads 30x3mm
    Crimp beads silver 2mm
    Crimp beads silver 4mm
    Rhinestone beads rondelle 6mm
    Facted glass beads Purple 6x4mm
    Cord end tips silver 4mm cord
    Jewelry glue
    Lobster clasp silver 12mm
    Jumpring silver 6mm
    Jumpring silver 4mm
    Stainless steel extender chain 40x30mm

    Share your jewelry projects on instagram with #beadsandbasics for a chance to win € 20,- shopping money.

    Enjoy creating!

How To Make a Faux Suede Bracelet With Tube Beads

This classy bracelet is easy to make yourself! You can use this design and make it in different colors with our wide range of Faux suede cord. 

Start by cutting the cord. You will need 4 strands of the same length and you can measure with your wrist how much you need. You will also need 1 strand that's about 2,5cm shorter and you will need to cut it in half. Now you can string 1 tube bead on the 4 other strands. Note: by making a twisting motion, it will be easier to string the tube beads. It also helps to cut the cord diagonally.

For the fifth strand you will have to do as follow: 
Put 1 bigger crimp bead (4mm) on the suede cord and make a loop by putting the end back through the crimp bead. Do not fasten the bead yet! Cut a piece of Nylon thread and thread a smaller crimp bead (2mm). Put the nylon thread though the suede loop and back through the crimp bead. Pull it tight and fasten the crimp bead. Now you can pull the suede cord tight and also fasten the bigger crimp bead. Now you can thread the faceted and rhinestone beads through the nylon cord and repeat the step with the crimp beads on the other side. To cover the crimp beads, you can use our covers for the 2mm and a Cylinder spacer bead for the bigger crimp beads. 

Glue all the ends in the end tips and let it dry. Attach a 4mm jumpring to all the endtips. Use a 6mm jumpring to put all the strands together. Note: make sure to use the same order on both sides, this way the bracelet won't twist while wearing. Attach the lobster clasp and extender and your bracelet is ready to wear!

Used materials: 

Spacer beads cylinder 6x5mm
Imitation suede lace lilac 3mm
Silver tube beads 30x3mm
Crimp beads silver 2mm
Crimp beads silver 4mm
Rhinestone beads rondelle 6mm
Facted glass beads Purple 6x4mm
Cord end tips silver 4mm cord
Jewelry glue
Lobster clasp silver 12mm
Jumpring silver 6mm
Jumpring silver 4mm
Stainless steel extender chain 40x30mm

Share your jewelry projects on instagram with #beadsandbasics for a chance to win € 20,- shopping money.

Enjoy creating!

How To Make a Faux Suede Bracelet With Tube Beads

Article code : Not for sale. Online Jewelry Inspiration

How To Make a Faux Suede Bracelet With Tube Beads
How To Make a Faux Suede Bracelet With Tube Beads €0,00
In stock
€0,00

    How To Make a Faux Suede Bracelet With Tube Beads

    This classy bracelet is easy to make yourself! You can use this design and make it in different colors with our wide range of Faux suede cord. 

    Start by cutting the cord. You will need 4 strands of the same length and you can measure with your wrist how much you need. You will also need 1 strand that's about 2,5cm shorter and you will need to cut it in half. Now you can string 1 tube bead on the 4 other strands. Note: by making a twisting motion, it will be easier to string the tube beads. It also helps to cut the cord diagonally.

    For the fifth strand you will have to do as follow: 
    Put 1 bigger crimp bead (4mm) on the suede cord and make a loop by putting the end back through the crimp bead. Do not fasten the bead yet! Cut a piece of Nylon thread and thread a smaller crimp bead (2mm). Put the nylon thread though the suede loop and back through the crimp bead. Pull it tight and fasten the crimp bead. Now you can pull the suede cord tight and also fasten the bigger crimp bead. Now you can thread the faceted and rhinestone beads through the nylon cord and repeat the step with the crimp beads on the other side. To cover the crimp beads, you can use our covers for the 2mm and a Cylinder spacer bead for the bigger crimp beads. 

    Glue all the ends in the end tips and let it dry. Attach a 4mm jumpring to all the endtips. Use a 6mm jumpring to put all the strands together. Note: make sure to use the same order on both sides, this way the bracelet won't twist while wearing. Attach the lobster clasp and extender and your bracelet is ready to wear!

    Used materials: 

    Spacer beads cylinder 6x5mm
    Imitation suede lace lilac 3mm
    Silver tube beads 30x3mm
    Crimp beads silver 2mm
    Crimp beads silver 4mm
    Rhinestone beads rondelle 6mm
    Facted glass beads Purple 6x4mm
    Cord end tips silver 4mm cord
    Jewelry glue
    Lobster clasp silver 12mm
    Jumpring silver 6mm
    Jumpring silver 4mm
    Stainless steel extender chain 40x30mm

    Share your jewelry projects on instagram with #beadsandbasics for a chance to win € 20,- shopping money.

    Enjoy creating!

How To Make a Faux Suede Bracelet With Tube Beads

This classy bracelet is easy to make yourself! You can use this design and make it in different colors with our wide range of Faux suede cord. 

Start by cutting the cord. You will need 4 strands of the same length and you can measure with your wrist how much you need. You will also need 1 strand that's about 2,5cm shorter and you will need to cut it in half. Now you can string 1 tube bead on the 4 other strands. Note: by making a twisting motion, it will be easier to string the tube beads. It also helps to cut the cord diagonally.

For the fifth strand you will have to do as follow: 
Put 1 bigger crimp bead (4mm) on the suede cord and make a loop by putting the end back through the crimp bead. Do not fasten the bead yet! Cut a piece of Nylon thread and thread a smaller crimp bead (2mm). Put the nylon thread though the suede loop and back through the crimp bead. Pull it tight and fasten the crimp bead. Now you can pull the suede cord tight and also fasten the bigger crimp bead. Now you can thread the faceted and rhinestone beads through the nylon cord and repeat the step with the crimp beads on the other side. To cover the crimp beads, you can use our covers for the 2mm and a Cylinder spacer bead for the bigger crimp beads. 

Glue all the ends in the end tips and let it dry. Attach a 4mm jumpring to all the endtips. Use a 6mm jumpring to put all the strands together. Note: make sure to use the same order on both sides, this way the bracelet won't twist while wearing. Attach the lobster clasp and extender and your bracelet is ready to wear!

Used materials: 

Spacer beads cylinder 6x5mm
Imitation suede lace lilac 3mm
Silver tube beads 30x3mm
Crimp beads silver 2mm
Crimp beads silver 4mm
Rhinestone beads rondelle 6mm
Facted glass beads Purple 6x4mm
Cord end tips silver 4mm cord
Jewelry glue
Lobster clasp silver 12mm
Jumpring silver 6mm
Jumpring silver 4mm
Stainless steel extender chain 40x30mm

Share your jewelry projects on instagram with #beadsandbasics for a chance to win € 20,- shopping money.

Enjoy creating!